For a best rate of success, there are some dos and don’ts on this one.
Don’ts: – don’t use the patch for upgrading to version 1.1, it will cause the game to crash when you try to run it. – the controller compatibility patch for XBOX and Playstation controllers has been removed from the general patch for this version of Need For Speed, stay away from it at it will also cause the game to crash. The game will run fine without, but simply not displaying the PS/XBOX buttons to press.
Dos: 1) download the Need For Speed ProStreet Generic Fix, you can enable all options on this one as your heart desires. – even including resolutions past FullHD and above 60 Hz refresh rate 🙂
2) Apply a no DVD Patch for version 1.0 of the game
First of all, follow these instructions, however if you have a multi-monitor setup like myself, you might run into the problem that the game will open on the wrong monitor and hence also use a wrong resolution. Solution here is, too choose “Windowed Mode” in config.exe and install the tool Borderless Gaming, which will force opening the game in full screen on the correct monitor 🙂
In my case, I bought a key for Origin / EA App , which brings in some things to take care about, I will mention them here.
Download the Generic fix by selecting \/ -> Developer Build (untested). The final release (aka “Direct Link”) did not work for me. The Developer Build was from early 2024, which would be executed under Win11 just fine, while the final release would simply not activate, so no changes were made to the game: https://thirteenag.github.io/wfp#nfs
. Activating all re-sizing options (1) as by default was however worth It, the FMVs were not in a wrong aspect, at least not on an Nvidia GTX 1070 in FHD. I also activated XBOX Controller Support
When using an optical media, you may need a no CD Fix, for EA App download, just had to decline the PunkBuster installation at the end of the setup process. Unfortunately the progress for the EA App will freeze at 72%. I had to force close EA App via Task Manager, then re-open the EA App.
Enjoy playing this 16 years of jewel in gaming history in Full HD 😊 – it’s one of the rare games even supporting higher resolutions than that! 😊
If you have however a 2K or higher res monitor with G-Sync functionality, then do this:
1) use the final release of the Generic Fix.
2) Make sure G-Sync is on for your graphics card and in the monitor
3) Set the following settings in NFSUndercover.GenericFix.ini:
[MultiFix] ResDetect = 0 ; Adds resolution auto-detection for the in-game options menu.
[MAIN] Scaling = 0 ; Adjusts FOV aspect ratio to be mathematically correct. Requires FixFOV to be enabled.
[MISC] SkipIntro = 1 ; Skips FMVs that play when you launch the game.
This installation manual is based off the YouTube video by 77Vids about installation on Windows 10 (This installation manual is based off the YouTube video by 77Vids about installation on Windows 10 (https://www.youtube.com/watch?v=cFWGGR97w3Y) , however there are some differences, which I will mention here.
Differences:
Download the Widescreen fix by selecting \/ -> Developer Build (untested). The final release (aka “Direct Link”) did not work for me. The Developer Build was from early 2024, which would be executed under Win11 just fine, while the final release would simply not activate, so no changes were made to the game.
The options of the .ini file slightly differ from the suggestions in the video, but nothing too major that one would be confused. Activating all re-sizing options (1) as by default was however worth It, the FMVs were not in a wrong aspect ratio as claimed in the video, at least not on an Nvidia GTX 1070 in FHD.
A No CD Patch was required, so you can forget about putting it into compatibility mode.
This installation manual is based off the YouTube video by 77Vids about installation on Windows 10 (https://www.youtube.com/watch?v=cFWGGR97w3Y) , however there are some differences, which I will mention here.
Differences:
Download the Widescreen fix by selecting \/ -> Developer Build (untested). The final release (aka “Direct Link”) did not work for me. The Developer Build was from early 2024, which would be executed under Win11 just fine, while the final release would simply not activate, so no changes were made to the game.
The options of the .ini file slightly differ from the suggestions in the video, but nothing too major that one would be confused. Activating all re-sizing options (1) as by default was however worth It, the FMVs were not in a wrong aspect ratio as claimed in the video, at least not on an Nvidia GTX 1070 in FHD.
A No CD Patch was not required if you use the Black Edition release of the game (US Markets only)
After fighting for 2 years to hav e my Toshiba TV not automatically turn off on me despite sleep timer and power saving are both off. (see suggestion 1, 8 and 11), it keeps giving me a warning after a while that the TV is powering off if I am not pressing a key on the remote. This is especially annoying as I connected it to my PC as a 3rd monitor.
Street Fighter IV is a game that really connects certain events and memories in live, so when I found a way to get a Steam key, I went for it, and then the challenge of getting it to work in the latest Windows 11 was on.
There are basically 2 ways:
Solution 1: with GFWL (“Games For Windows – Live”) already installed Requirements: You already have GFWL installed from a time back then (e.g. when Windows 8.x was still around, and then updated your installation to Windows 10 and then to Windows 11).
Steps: – Block StreetFighterIV.exe’s accesss to the internet in your local firewall – When the game starts GFWL overlay will try to connect but fail and ask you to enter the game’s serial key. – Hit Escape to exit the prompt and overlay and enjoy playing the game!
For the longest time, there was no “settings app” available for this webcam under Windows, reason for this is, that is – as the name indicates – this specific model has been certified for use with the Cisco Conference Systems and Skype. While this particular model can be used with other video conferencing programs like Teams, Zoom, Google Meet, Discord, etc – anything that isn’t Cisco or Skype will result in a short flash of the picture every couple of minutes, it is not really disturbing much and only visible for a fraction of a second, but it is not certified for their use.
In 2022, The Logitech Webcam Settings App has been updated to support the C920-C!
Unfortunately earlier this year, they removed the Webcam Settings App from the download page of the C920-C and replaced it with their new universal webcam app “LogiTune”, despite it being listed in its recent release to be officially supporting the C920-C, it is not detected by LogiTune at all!
If you want to check with Logitech on the status of my bug report with them, you may refer to Ticket Number : 11130729 with their tech support department.
However with the release of Windows 11, Creative Labs finally put the card to rest and since even Daniel K. gave up on it (Final updates for my Support Packs and farewell), I was lucky that upgrading Windows 10 to Windows 11 just made the soundcard keep working, however occasionally, the driver would crash and require a reboot, and even in rare occasions, a workaround was necessary(spoiler alert: it still is, I just tried it out for this post).
Thanks to the free tool DriverMax I found that there is a modified driver for X-Fi cards that even run more stable than the official Windows 8.x-10 drivers, i.e. without the occasional crashing. It finds a driver version 6.0.1.1285 dated 24th of January 2021 by Auzentech and signature by Riolin Limited (Auzentech was a Korean computer hardware manufacturer that specialized in high-definition audio equipment and in particular PC sound cards and which went defunct in 2014).
It turns out Riolin Limited fixed the driver’s stability issues, by removing the “What U Hear” feature, means you cannot anymore record what you hear through the soundcard. However I decided to keep using it, as I prefer a more stable driver than having more features.
If you need the “What U Hear” feature, I suggest getting the headphone DAC / USB Soundcard Creative Sound Blaster Play! 3 which does provide this feature, plus is one of the few USB soundcards still offering an analog line in port (No, Mic and Line-In are not the same!).
For many many years, it annoyed me to the most, that my laser printer DELL C1765nfw which I bought in 2014 would not work in Linux at all, I never found a driver it works, and even if you find one and install the cups package, it will not work in many cases, if you don’t do the setup process exactly as I describe it here.
I found out that there is a working printer driver available now via OpenPrinting
first open the printer settings program Install it with the command line:
sudo dnf install cups-drivers-foo2hbpl
Then add the new printer using “Network printer” —> “Find network” printer and enter its IP, for me it is 192.168.1.60:
it finds the printer at port 9100 using for a connection the AppSocket/HPJetDirect.
Then select “Select printer from database” and use the Dell C1765
Then it is found and the Describe printer dialog fields are pre-defined correctly.
When it asks whether you want to print a test page, decline as first we need to setup the driver to allow printing in color, as per default it is setup to print in b/w only.
Change color mode from “Monochrome” to Color:
Once changes are applied, you can happily print a test page.
As for the USB floppy disk drivers, it makes me mad that it constantly probes for whether a disk has been inserted, so it constantly lids up and clicks.
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.